Saf-T Vent CI Plus

Special Gas Vent for condensing flue gases

Improving on the leader

Saf-T Vent CI Plus is the leading commercial double-wall special gas vent system made from superferritic stainless steel. With increased airspace between the inner flue conduit and the outer jacket, today's CI Plus reduces the required clearance to combustibles and makes a more rigid flue pipe - large diameters are easier to handle.		 Saf-T Vent CI Plus the leading commerical double-wall special gas vent system.
 

Sure-Seal closure system

The proven tapered connection has been improved with a new closure ring that actually draws the joint together. The built in commercial-grade silicone gasket provides a seal able to fully withstand the increased pressures and stresses of today's high efficiency appliances.
 

Stainless steel outer jacket

Saf-T Vent CI Plus outer jacket is stainless steel - no need to paint this system to protect it from outside elements or from airborne contaminants commonly found in many mechanical rooms.
 

100% special superferritic stainless steel

The Saf-T Vent family of products is manufactured using only high-grade stainless steel alloys. Wherever condensing flue gases can possibly come in contact with the flue, we use components made only from special superferritic stainless steel alloys such as AL 29-4C®.

 

Completely engineered to meet your system requirements

Over a decade of successful installations with Saf-T Vent CI and established relationships with major heating appliance manufacturers has helped perfect this venting system. We offer a complete line of diameters and fittings designed to work together and fit properly. Saf-T Vent CI Plus is engineered from the appliance flue outlet to the termination: starters. elbows, boot-tees, drain fittings, and supports - everything you need for hassle- free installation.

 

Technical Specifications:

  • Double-wall
  • 5" - 32" diameters
  • Tapered male and female ends
  • Patented Sure-Seal closure system (#6,702,338)
  • Superferritic stainless steel inner conduit, 430 stainless steel outer jacket standard

    Components include:
              Piping
              Adjustable Lengths
              Fittings
              Adapters, Supports, and Guides
              Accessories
              Wall Penetrations
              Terminations
              Custom fabrications
              Sealants

    		•

     

    Fuels:

  • Natural Gas
  • Propane
    		•

     

    Pressure:

  • From -2" wc up to 15" wc
    		•

     

    UL 1738 / ULC S636:

  • Tested & Listed

    •  

    Uses:

  • Special gas vent for mid and high-efficiency gas fired heaters and boilers
  • ANSI Category I, II, III, or IV appliances and Direct Vent
  • Negative, neutral or positive pressure venting systems
    		•

     

    Temperature:

  • Up to 550°F
    		•

     

    Specially suited for:

  • Condensing vent systems
  • Near-condensing vent systems
  • Non-condensing vent systems with positive pressure
    		•

     

    Fast, on site assembly. No need for welding or special tools!

    Saf-T Vent CI Plus elements simplify on-site installation. Components are joined together with simple Locking Tabs. On sizes over 16", sealant is applied to the inside of the female end. A Locking Strap is fitted over the Locking Tabs and tightened.

    No welding is necessary. A Coupler Band is then fitted over the outer wall and bolted in place.

    Hangers, Wall Supports, and other accessories are just as easy to install. See the complete Installation Instructions for details.

     

    CI Plus System Details

     

     


    All information is subject to change without notice. Dimensions and specifications shown are within manufacturing tolerances.
    © Copyright Commercial Products Group of Hart & Cooley, Inc., October, 2007. All Rights Reserved.