Containment Band Set
	Used to trim the outer wall and contain and seal the inner liner of the stack and accessories. Sealant must be applied prior to installation.	Parts include: One Containment Band One Intermediate Band One Closure Band Insulation

Boiler Adapter
	Used to transition to a flanged appliance. Features 24 connection slots to mate 4, 6, 8, or 12 bolt-hole patterns. 24 Holes .375 x 1.000 at 15 degrees. Constructed of 1/4" Hot Rolled Steel.	Parts include: One Boiler Adaptor One Half Outer Wall Closure Band Nuts and bolts included.

Generator Adapter
	Parts include: One Generator Adaptor One Half Outer Wall Closure Band Nuts and bolts included. All VSI I.D. A B C D 6 6.125 9.50 11.0 08 - 0.875" Dia at 45° 8 8.125 11.75 13.5 08 - 0.875" Dia at 45° 10 10.125 14.25 16.0 12 - 1.000" Dia at 30° 12 12.125 17.00 19.0 12 - 1.000" Dia at 30° 14 14.125 18.75 21.0 12 - 1.125" Dia at 30° 16 16.125 21.25 23.5 16 - 1.125" Dia at 22.5° 18 18.125 22.75 25.0 16 - 1.250" Dia at 22.5° 20 20.125 25.00 27.5 20 - 1.250" Dia at 18° 24 24.125 29.50 32.0 21 - 1.375" Dia at 18°
Used for connections to appliances with American Standard Class 125 Cast Iron Pipe Flanges. Constructed of 1/4" Hot Rolled Steel.

Stack Support Assembly
	Used as the main load bearing member. The Split Plate and Split Clamp Flange are assembled in two half sections aligned 90 degrees apart, above and below a complete inner pipe joint. The matching holes allow the use of 3/8" bolts and nuts to clamp the inner wall flanges forming a sandwich type assembly. Constructed of 1/4" Hot Rolled Steel.	Parts include: One Split Plate One Split Clamp Flange Two Half Outer Wall Closure Bands Nuts and bolts included.

Split Clamp Flange
	Used for attaching pipe flange to supports. Holes are pre-punched and are designed to match holes in the Split Angle Ring and the Stack Support Plate.	Parts include: One Split Clamp Flange One Half Outer Wall Closure Band Nuts and bolts included.

Full Split Angle Ring
	Parts include: One Full or Half Split Angle Ring Nuts and bolts included.     IVSI-1 IVSI-2 IVSI-4 A 2.5" 4.5" 8.5" B 6" 6" 10" C 8" 8" 12"
Used for guiding vertical stack and providing lateral support. Half Split Angle Ring may be useful for horizontal pipe support. Constructed of 1/4" and 3/16" Hot Rolled Steel.

Hanger Bracket
	Parts include: One Hanger Bracket     IVSI-1 IVSI-2 IVSI-4 A 2.5" 4.5" 8.5" B 6" 6" 10" C 8" 8" 12"
Used as a support saddle for short horizontal runs. Constructed of 3/16" Hot Rolled Steel.

Floor Alignment Guide
	Used to allow correct vertical guiding and free expansion of the stack system through each floor. Straps and Angle Struts allow for appropriate spacing and as a means of securing the Floor Alignment Guide. Constructed of 1/4" and 3/16" Hot Rolled Steel.	Parts include: One Full Split Angle Ring with welded struts attached Nuts and bolts included.

Wall Guide Assembly
	May be used as a means of maintaining vertical alignment of system. Maintains 10" clearance from wall. Constructed of 1/4" and 3/16" Hot Rolled Steel and 2" X 2" Angle Iron	Parts include: One Split Angle Ring One Wall Bracket Nuts and bolts included.

Wall Support Assembly
	Used as a means of supporting vertical stack. Maintains 10" clearance from wall. Constructed of 1/4" and 3/16" Hot Rolled Steel and 2" X 2" Angle Iron.	Parts include: One Wall Guide Assembly Two Split Clamp Flanges Two Half Outer Wall Closure Bands Nuts and bolts included.